About Leading Edge Platform

Leading Edge Sharpening System is the only 3D-printable sharpener that can sharpen knives, scissors, and other edged tools. It has a magnetic knife holder, a three-point knife guide, optional accessories such as vertical knife support, scissors clamp, long blade attachment, fine-tuning, convex stone holder, and various knife clamps. Leading Edge Sharpening System works extremely well for almost any sharpening scenario, outperforming many high-end sharpening systems currently on the market.

Designed for hobbyists and makers, Leading Edge Sharpening System is based on traditional concepts: 6" sharpening stones, modular approach, and standard diameter rods. It gives Leading Edge platform a very low cost of ownership in conjunction with unlimited upgradability. You are not limited to 3D-printed accessories designed by Leading Edge. You can use various compatible accessories and clamps made by Hapstone, TSPROF, Kazak, and KakBritva.

Leading Edge Core is a major step towards true "cross-platform" sharpening systems designed by Burt Joubert, creator of GearConnect, the bridge between famous sharpening systems and clamps designed for other platforms. Leading Edge Core goes far beyond that – customers can create hybrids where two sharpening systems are fused together. Work Sharp Precision Adjust becomes the first habitat for Leading Edge Core Upgrade, a key element of symbiosis. Leading Edge Core Upgrade accepts attachments designed for Leading Edge Sharpening System such as vertical knife support, scissors clamp, long blade attachment, etc.

Neodymium Magnets Safety Warning
Los imanes de neodimio presentan el riesgo de atraerse con fuerza entre sí, lo que puede provocar pellizcos en la piel y provocar lesiones graves. Debido a su fragilidad, los imanes de neodimio pueden romperse y romperse fácilmente.

Para garantizar la seguridad:

  • Mantenga los imanes de neodimio fuera del alcance de los niños.
  • Evite la proximidad a personas con marcapasos.
  • Evite el contacto con medios magnéticos.
  • Mantenga una distancia segura de dispositivos GPS y smartphones.
Questions and Answers
Questions & Answers
avatar
Recent Questions

avatar
Guest  •  4 months ago
Which adapters?
avatar
⚙️Leading Edge  •  4 months ago
This should work fine on the TooHR system with the same size clamp bar as the TSProf K03 / Kadet / Pioneer. Some TooHR systems use a different clamp bar size altogether.
0 | 0
avatar
Guest  •  1 year ago
If it does, how do you calibrate the pro hunter's integrated axicube using the calibration plate with this ?
avatar
⚙️Leading Edge  •  1 year ago
Q - If it does, how do you calibrate the pro hunter's integrated axicube using the calibration plate with this ?

A - Yes, this Leading Edge platform works with all K03 and Kadet models. For Axicube-i calibration - you can still use the same calibration plate as used in the K03 clamps, simply place the calibration plate on top of the Leading Edge platform and adjust your angle until it aligns with the calibration plate, then calibrate your Axicube.

Just a trivial note of interest - the Axicube-i is calibrated at 14 degrees.

You won't actually need to recalibrate your Axicube-i if you're using your K03 on the same surface / table as you previous calibrated it on - simply swap the clamps for the Leading Edge platform.

You will have to take note of the fact that some knife blades lie flat on its face when sharpening on any platform type system like this, so you'll have to slightly compensate your sharpening angle for this fact.

868knives  •  1 year ago
Much thanks for the response. I'll pick one up when it's back in stock. Went out of stock in less than a day lol
⚙️Leading Edge  •  1 year ago
avatar
Guest  •  2 years ago
Video the tsprof table being used
avatar
⚙️Leading Edge  •  2 years ago
Below is the instructional video. Gritomatic will likely add it to the description soon.

https://youtu.be/JtlBMFHbUzA
0 | 0
View all
view